Scissors Lift Table
Single Scissor Lift Table
MarcoLift single scissors – is a lift table with a set of single scissors. It is the basic model of the lift table range.
– lifting capacity up to 10000 kg
– stroke up to 2000 mm
– platform size up to 3000 mm x 2000 mm.
The main support steel structure consists of rectangular steel profiles to assure the highest stability and resistance.
Customised solutions to particular requirements can be provided.
Low Profile and U-Shaped Lift Table
MarcoLift low-profile has a total vertical lift stroke, an important requirement when the lift table is installed in a production line co-ordinated logistic system.
MarcoLift low-profile and MarcoLift U-shaped low-profile, thanks to its low height, requires no pit in the floor. This makes it more adaptable and suitable for different application uses. It provides the operator with goods or work pieces at the right working height.
The power pack for MarcoLift low-profile and MarcoLift U-shaped low-profile are separately sited from the lift table so as not to limit the lift table operation.
The pallet, crate or container can be positioned on the lift table directly from the floor level by means of a pallet truck avoiding the need of an access ramp.
The Standard MarcoLift lowprofile and MarcoLift Ushaped low-profile has the following features:
– lifting capacity up to 2000 kg
– stroke up to 800 mm
– platform size up to 1400 mm x 1250 mm.
Customised solutions to particular requirements can be provided.
Low Profile and U-Shaped Lift Table
MarcoLift low-profile has a total vertical lift stroke, an important requirement when the lift table is installed in a production line co-ordinated logistic system.
MarcoLift low-profile and MarcoLift U-shaped low-profile, thanks to its low height, requires no pit in the floor. This makes it more adaptable and suitable for different application uses. It provides the operator with goods or work pieces at the right working height.
The power pack for MarcoLift low-profile and MarcoLift U-shaped low-profile are separately sited from the lift table so as not to limit the lift table operation.
The pallet, crate or container can be positioned on the lift table directly from the floor level by means of a pallet truck avoiding the need of an access ramp.
The Standard MarcoLift lowprofile and MarcoLift Ushaped low-profile has the following features:
– lifting capacity up to 2000 kg
– stroke up to 800 mm
– platform size up to 1400 mm x 1250 mm.
Customised solutions to particular requirements can be provided.
Loading Dock Table
MarcoLift long-load is designed with two or multiple sets of scissors placed end to end to achieve the requested platform length and lifting capacity. In principle, this range consists of a combination of several MarcoLift single scissors.
The lifting stroke of the scissors set is created by a controlled synchronism to perform a parallel lifting motion.
– lifting capacity up to 2000 kg
– stroke up to 800 mm
– platform size up to 1400 mm x 1250 mm.
High Lift Table
Higher strokes are achieved by designing the lift table with a multiple set of vertically mounted scissors.
MarcoLift high-lift can be used for example as work platforms, pallet loaders, elevators, disabled persons lifts and pallet stackers.
– lifting capacity up to 4000 kg
– stroke up to 4300 mm
– platform size up to 3000 mm x 1200 mm
Customised solutions to particular requirements can be provided.
High Lift Table
Higher strokes are achieved by designing the lift table with a multiple set of vertically mounted scissors.
MarcoLift high-lift can be used for example as work platforms, pallet loaders, elevators, disabled persons lifts and pallet stackers.
– lifting capacity up to 4000 kg
– stroke up to 4300 mm
– platform size up to 3000 mm x 1200 mm
Customised solutions to particular requirements can be provided.
Vehicle Lift Table
This lifting table is intended for the transport of vehicles and not of persons.
MarcoLift vehicle carrier can only be utilised with equally distributed loads and not as a conventional lifting table.
Particular training for lift operation and use is required.
Installation is performed according to the current ruling safety directions.
– lifting capacity up to 2500 kg
– stroke up to 7000 mm
– platform size up to 7500 mm x 2500 mm.
Customised configuration and sizes can be provided.
Long Length Table
MarcoLift long-load is designed with two or multiple sets of scissors placed end to end to achieve the requested platform length and lifting capacity. In principle, this range consists of a combination of several MarcoLift single scissors.
The lifting stroke of the scissors set is created by a controlled synchronism to perform a parallel lifting motion.
– lifting capacity up to 8000 kg
– stroke up to 2000 mm
– platform size up to 6000 mm x 2000 mm.
Long Length Table
MarcoLift long-load is designed with two or multiple sets of scissors placed end to end to achieve the requested platform length and lifting capacity. In principle, this range consists of a combination of several MarcoLift single scissors.
The lifting stroke of the scissors set is created by a controlled synchronism to perform a parallel lifting motion.
– lifting capacity up to 8000 kg
– stroke up to 2000 mm
– platform size up to 6000 mm x 2000 mm.
Our experienced team knows that choosing the right lifting equipment is vital. Designed to withstand heavy loads, Alniff’s portable material handling equipment is constructed from structural heavy-duty steel for guaranteed strength and durability. With countless satisfied clients, we are confident that our mobile lift tables will be an indispensable lifting equipment for your company.
Contact us for a quote today!
Get in touch with us
Let us help you find the right solutions for your business!